Xinhua Headlines: China's spacecraft takes off from moon with first samples from lunar far side-Xinhua

春色直播

Xinhua Headlines: China's spacecraft takes off from moon with first samples from lunar far side

Source: Xinhua

Editor: huaxia

2024-06-04 12:52:32

* The ascender of China's Chang'e-6 probe lifted off from lunar surface on Tuesday morning, carrying samples collected from the moon's far side, an unprecedented feat in human lunar exploration history.

* The spacecraft finished its intelligent and rapid sampling work, and the samples were stowed in a container inside the ascender of the probe as planned.

* The ascender is expected to carry out unmanned rendezvous and docking with the orbiter-returner combination in lunar orbit, and the samples will be transferred to the returner. The orbiter-returner combination will orbit the moon, awaiting the optimal time to transfer back to Earth.

by Xinhua writers Liu Yiwei, Yu Fei, Quan Xiaoshu

BEIJING, June 4 (Xinhua) -- The ascender of China's Chang'e-6 probe lifted off from lunar surface on Tuesday morning, carrying samples collected from the moon's far side, an unprecedented feat in human lunar exploration history.

The ascender has entered a preset orbit around the moon, said the China National Space Administration (CNSA).

The ascender took off at 7:38 a.m. (Beijing Time) from the moon's far side. A 3,000-newton engine, after working for about six minutes, pushed the ascender to the preset lunar orbit, according to the CNSA.

This image taken from video animation at Beijing Aerospace Control Center (BACC) on June 4, 2024 shows the ascender of China's Chang'e-6 probe, carrying samples collected from the moon's far side, lifting off from lunar surface. (Xinhua/Jin Liwang)

The Chang'e-6 probe, comprising an orbiter, a lander, an ascender and a returner -- like its predecessor Chang'e-5 -- was launched on May 3. The lander-ascender combination, separated from the orbiter-returner combination on May 30, touched down at the designated landing area in the South Pole-Aitken (SPA) Basin on June 2.

The spacecraft finished its intelligent and rapid sampling work, and the samples were stowed in a container inside the ascender of the probe as planned, the CNSA said.

During sampling and packaging, researchers conducted simulated sampling in a ground lab, based on the detection data sent back by the Queqiao-2 relay satellite, providing important support for decision-making and operations in every link.

"The mission has withstood the test of high temperature on the far side of the moon," the CNSA said.

It adopted two methods of moon sampling, including using a drill to collect subsurface samples and grabbing samples on the surface with a robotic arm. It automatically gathered diverse samples at different sites.

Ge Ping, spokesperson for the Chang'e-6 mission, said that through detailed analysis of the soil structure, physical properties and material composition of the Chang'e-6 samples, scientists will be able to deepen research on the formation and evolutionary history of the moon, the origin of the solar system and so on, laying an improved foundation for later exploration missions to build on.

This image taken from video animation at Beijing Aerospace Control Center (BACC) on June 4, 2024 shows the lander-ascender combination of Chang'e-6 probe waiting to lift off from lunar surface. (Xinhua/Jin Liwang)

The multiple payloads installed on the lander, including the landing camera, panoramic camera, lunar soil structure detector and lunar mineral spectrum analyzer, worked well and carried out scientific exploration as planned, the CNSA said.

The lunar soil structure detector analyzed and judged the underground lunar soil structure of the sampling area, providing data reference for the sample drilling.

The international payloads carried by the lander of Chang'e-6, including the Negative Ions on the Lunar Surface (NILS), developed by the European Space Agency (ESA)/Sweden, and the Detection of Outgassing RadoN (DORN), developed by France, also worked well and carried out corresponding scientific detection, according to the CNSA.

The instrument DORN operated when the spacecraft was flying from Earth to the moon, orbiting and on the surface of the moon, and the payload NILS was powered up on the lunar surface.

Besides, a laser retro-reflector developed by Italy, installed on the top of the lander, serves as a position marking point on the far side of the moon for distance measurement.

After the sampling was completed, a Chinese national flag carried by the lander was unfurled for the first time on the far side of the moon.

Due to the different landing positions, the national flag display system of Chang'e-6 has been improved on the basis of the Chang'e-5 mission.

A Chinese national flag carried by the lander of Chang'e-6 probe unfurls at the moon's far side, June 4, 2024. (CNSA/Handout via Xinhua)

Unlike takeoff on Earth, the ascender could not rely on a launch tower system. The lander acted as a temporary "launching pad."

The Chang'e-6 ascender's takeoff from the far side of the moon cannot copy the Chang'e-5 ascent from the near side of the moon, as it cannot directly receive ground control and support. It utilized its special sensors to achieve autonomous positioning and orientation, with the assistance of Queqiao-2 for communication.

Compared with Chang'e-5, Chang'e-6 has seen improvements in the autonomy and reliability of its navigation, guidance and control system, in order to tackle the challenges posed by the uncertainties of the moon's far side during its takeoff and ascent, said Qiao Dezhi, a space expert from the China Aerospace Science and Technology Corporation (CASC).

The control system of Chang'e-6 has also been enhanced to improve its autonomy, enabling it to complete lunar takeoff and ascent with reduced reliance on the Queqiao-2 relay satellite and ground support, said Huang Hao, another space expert from the CASC.

The ascender is expected to carry out unmanned rendezvous and docking with the orbiter-returner combination in lunar orbit, and the samples will be transferred to the returner.

The orbiter-returner combination will orbit the moon, awaiting the optimal time to transfer back to Earth. When it approaches Earth, the returner carrying the lunar samples will re-enter the atmosphere, aiming for a touchdown at Siziwang Banner in north China's Inner Mongolia Autonomous Region, the CNSA said.

(Xinhua reporter Wang Chenxi also contributed to the story.) (Video reporter: Liu Yiwei, Yu Fei, Quan Xiaoshu, Wang Chenxi, Yang Zhigang; Video editors: Hong Ling, Zhao Xiaoqing) 

Comments

Comments (0)
Send

    Follow us on